Lamppost or electricity pylon foundations
type FKVR

Lammpost foundations

The problem:

Damaged lampposts or signs directly concreted into the ground have to be expensively dug out.

The solution:

Photo 1:
The cavities are inserted in the ground, wiring installed and they are then filled with concrete from outside.

Photo 2:
The post is then fixed in place and the cavity filled with sand.

Photos 3 and 4:
Finally, a thin coat of lean concrete is poured at the top that can easily be removed in the event of damage.

Folded spiral-seam piping of zinc-coated sheet metal

• ready for installation
• with / without inserted base plate / top cover
• with / without cut-outs or drill holes for wiring

System descriptions:

MSL foundation piping is manufactured using the same process as for displacement piping - screw-shaped bend, folded leak proof. Reinforcement beading of 2.5 to 9 mm depending on diameter gives the foundation piping very high strength to resist the pressure of the fresh concrete. The piping can be made in any desired length. It can be supplied with base plate rolled in if the intended use dictates.
Loose top covers are offered. Please note these cannot be stepped on in the standard design. Piping is available in dia-meters from 4 to 200 cm.

When used as lamppost foundations cut-outs or drill holes for later wiring can be provided. MSL foundation piping type FKVR is usually supplied zinc coated. It is used e.g. as external
shuttering for block foundations, as foundation shuttering for posts and signs, as electricity pylon foundations or as shuttering elements for lamp post foundations. In the event of damage it makes it easier and cheaper to replace a lamppost.

Download:

	Brochure: Pipe Systems
	System Specifications type FKVR and text for invitation of tenders
	Customer inquiry

Example of use:
Electricity pylon foundations, photos 5 to 10.