Edging systems for joint band installation,
type AKB | AKB1 | AKB2 | AKB3

The MSL systems for joint bands meet DIN V 18197: 2005-10 requirements.

System specifications:

In installing the joint bands make sure the fastening and support elements satisfy the DIN V 18197: 2005-10 requirement for a minimum gap of 2 cm to the joint band. Fastening point intervals shouldn't exceed 25 cm. Interior joint bands in horizontal and slightly tilted building components such as floors and ceilings are to be laid V-shaped for ventilation during concreting. To fasten the joint bands to the MSL products we recommend using MSL fastening hooks.

Benefit: simplified installation and time savings.

Type AKB2
Two-part edging
Element length 3.0 m, open base. Edge width, height and element height to client specifications.

Type AKB3
Joint band guide element with 2 loose metal sheets on edge

The 3.0 m-long joint band guide element consists of 4 joint band brackets permanently mutually connected by 3 longitudinal steel rods. The loose corrugated profile perforated metal sheets are fastened to the vertical reinforcement. The joint band is inserted in the bracket/s on site and secured top and bottom to
the longitudinal steel rods.

Download:

	Brochure: Construction joint systems
	System specifications type AKB, text for invitation of tenders and customer inquiry